Senzor
The Signet 2250 Hydrostatic Level Sensor for level and depth control has a one-piece injection molded PVDF body and ceramic diaphragm for superior compatibility in corrosive liquids. Utilizing hydrostatic pressure the 2250 disregards false level signals from steam vapors, foam or any other debris on the liquid surface. Two pressure ranges allow for optimal resolution matched to your sensing needs. Solid state circuitry eliminates drift (no internal potentiometers).
These sensors are available with a proprietary digital (S3L) output, or 4 to 20 mA output. The extended cable and capillary tubing with the union connection and a customer supplied conduit, allow submersion in process vessels.
Measurement range:
-
Cable Length: 10 m (32.8 ft)
-
Operating Temperature:** 15° to 85°C (5° to 185°F)
-
Operating Pressures:**
-XU Ultra Low: 0 to 0.7 bar (0 to 10 psi)
-XL Low: 0 to 3.4 bar (0 to 50 psi) -
Compatibility: 8900, 9900 and 9950
The 9900 Transmitter
Fot at-a-glance visibility, the 9900 Transmitter features a large auto-sensing backlit display, "dial-type" bar graph and relay and warning LEDs. The intuitive menu system is consistent with processPro and ProPoint transmitters, assuring you of a quicker and easier installation. The optional Relay, Direct Conducttivity/Resistivity, H COMM and Batch plug-in modules offers ease of use. The PC COMM configuration tool allows you to easely set-up, review, save and load all modifiable parameters. The unit can be used with default valves for quick and easy programming or can be customised with labelling, ajustable minimum and maximum dial settings, and unit and decimal measurement choices. The versatile device also allows third-party 4 to 20 mA signals to be used as an input (optional 8058 module required).
The 9900 Transmitter, a member of Signet's line of SmartPro instruments, provides a single-channel interface for all Flow, pH/ORP, Conductivity/Resistivity, Salinity, Pressure, Temperature, Level, Dissolved Oxygen, Turbidity, Batch and other applications.
The 9900 is available in Panel Mount. And runs on 10.8 to 35.2 VDC power (24 VDC nominal), and can power certain sensors on loop power.
Two dry-contact relays
In addition to the standard programmable Open Collector output in the base unit, the Panel Mount version of the 9900 has a slot for an optional Relay Module, which adds two programmable dry-contact relays. The Open Collector output in the base unit uses the Relay.
Dry-contact relays are electromechanical switches with a moving contact armature.
They are suitable for many general-purpose applications, AC or DC, including AC loads up to 250 V. Install RC Filter Kits, 3-8050.396, on relays used to switch motor or inductive loads.
● Two (2) SPDT dry-contact relay (DCR) inputs
● User programmable
● 250 V, 5 A maximum resistive loading (AC).
● Can switch line voltage (typically 120 to 240 VAC)
● Can switch DC voltage (< 30 VDC @ 5A)
4 to 20 mA Output Module adds an additional 4 to 20 mA loop output to a Signet 9900 Transmitter
● 4 to 20 mA Output Module can be powered using Loop Power or DC Power in the 9900 base unit.
● Independent settings for the loop currents of the Output Module and 9900 base unit (Error, Loop Adjustments, etc.).
| Fisa tehnica senzor hidrostatic.pdf | Fisa tehnica controller.pdf |
| Fisa tehnica mod relee.pdf | Fisa tehnica iesire 4-20 ma.pdf |
| Brosura controller.pdf |
